Cycle interrupted — user paused or opened lid during a running cycle
The Int error on the Maytag MVW7232HW indicates cycle interrupted — user paused or opened lid during a running cycle. This typically occurs due to lid opened mid-cycle for adding a forgotten item. Most homeowners fix this in 5 min by following the steps below.
Common Causes of Int
- 1Lid opened mid-cycle for adding a forgotten item
- 2Pause button pressed during the wash cycle
- 3Power interruption causing the cycle to halt
- 4Control board losing power momentarily
How to Fix Int
- 1
Step 1
If you intentionally paused the washer, close the lid firmly and press Start to resume
- 2
Step 2
If the lid was opened to add items, wait for the tub water level to drop below the door edge, add items, close and press Start
- 3
Step 3
If a power event caused the interruption, press Power and then Start to restart a fresh cycle
- 4
Step 4
Check that the power cord is fully plugged into the outlet
- 5
Step 5
Confirm the circuit breaker for the laundry circuit is not tripped
Tools Needed
When to Call a Technician
Int code appears with no user action and the washer does not resume — main control board may have developed a fault
Frequently Asked Questions
Common questions about Maytag Int error
The Int code on the Maytag MVW7232HW means the wash cycle was interrupted and is waiting for input before it can resume. This happens any time the lid is opened during operation or the Pause button is pressed. Simply close the lid and press Start to continue the cycle from where it stopped.
No. The Int code is informational and not an error in the traditional sense. It means the washer is paused and waiting. If Int appears without you pausing the washer, however, it may point to a power supply fluctuation or a main board fault that is worth having a technician check if it happens consistently.
Was this guide helpful?
Help us improve our repair guides